Panasonic KX-NT400

Firmware Version Update
Firmware Version Update
The firmware can be updated only in the setup procedure after connecting the KX-NT400 to a PBX.
You can use a FTP server or an SD memory card to provide the new firmware data.
For details, see "Firmware Version Update (Page 163)".
Parameter Name
Description Value Range Default Setting
FTP Server
Address
Enter the IP address for the FTP server. Valid IP Address 0.0.0.0
FTP Server Control
Port
Enter the port number for the FTP server. 21, 1024–65535 21
FTP User ID Enter the user ID for the FTP server. 0–24 characters –
FTP User
Password
Enter the user password for the FTP server. 0–24 characters –
FTP Path Enter the path of the firmware data in the FTP
server.
1–128 characters C:/panasonic/
nt400
FTP File Name Enter the file name of the firmware data. 1–24 characters PNT400
VLAN Specify whether VLAN is used. Enable, Disable Disable
VLAN ID Enter the VLAN ID when VLAN is enabled. 1–4094 1
VLAN Priority Enter the VLAN priority when VLAN is
enabled.
0–7 7
File Name Enter the file name and path of the firmware
data in the SD memory card.
0–256 characters –
180 Operating Instructions Document Version 2010-01
Appendix