3. Changing your PIN regularly.
Clearing Features
You can reset the following features to their default values:
Features Default Setting
Display Switching Mode Automatic
Hot Line Off
Calling Line Identification Restriction (CLIR) Allow
Calling/Connected Line Identification Presentation (CLIP/COLP) Caller ID assigned on your
extension
Preferred Line Assignment—Outgoing Intercom
Preferred Line Assignment—Incoming The longest ringing line
Alternate Receiving—Ring/Voice Ringing (Tone Call)
Forced Answerback Selection Disable
Live Call Screening Mode Set Hands-free mode
LCS Mode Set (After Answering) Stop recording
Automatic Call Waiting On
Manual Call Waiting—Intercom Calls On (Tone)
Call Waiting Tone Type Selection Tone 1
Absent Message Off
Personal Absent Message Cleared
Call Forwarding (FWD)/Do Not Disturb (DND)—Intercom/Outside
Calls
Off
FWD N/A Timer 15 seconds
Call Pickup Deny Allow
Headset Operation Headset off
Executive Busy Override Deny Allow
Paging Deny Allow
Key Pad Tone Set On
Background Music (BGM) Off
Data Line Security Off
Connected Line Identification Restriction [COLR] Allow
Log-in/Log-out Log-in
Message Waiting Off
Timed Reminder Cleared
Document Version 2010-01 Operating Instructions 131
Customizing the Telephone
To Next Page
Loading...
