Panasonic KX-NT400

• You can add a contact in the LDAP directory to your
personal contacts. For details, see "Contact List
(Page 108)".
• When you select a contact in the LDAP directory,
you can display detailed information (such as the
contact’s name, phone numbers, e-mail address,
etc.) by pressing Show Details.
You can use the buttons at the bottom of the window
to call the contact’s office, mobile, or home phone if
they are registered.
• Press to select a different LDAP server.
For details about specifying LDAP server
information, see "LDAP Server Settings
(Page 121)".
• For details about the icons and buttons on the
Contacts screen, see "Contacts Screen
(Page 32)".
Dialing by Using Call Logs
The last 100 incoming calls, outgoing calls, and missed
calls are stored in their respective logs, in order of
newest to oldest call.
You can make calls to the contacts/numbers listed in
the call logs.
1. Press the Call Log tab.
2. Select a log by pressing Outgoing, Incoming, or
Missed.
Note
• If you select a contact and then go off-hook,
the contact will be dialed immediately.
3. Select the desired entry.
Detailed information for the selected entry will
appear.
4. Press Call.
Note
• If you go off-hook while Call is selected, the
contact will be dialed immediately.
5. To end the call, go on-hook.
Usage tips
• For details about the buttons and icons on the Call
Log screen, see "Call Log Screen (Page 47)".
• On the detailed information screen, the following
actions are also available:
– Add to Directory: Add the information from the
call log to your personal directory. See "Adding
a Contact from a Call Log (Page 108)".
– Recorded Picture: When you receive a call
from a destination with an integrated camera, a
picture is taken and stored in the call log. Press
this button to view the picture.
– Show Details: Display a screen with additional
details about the call, such as the time the call
started and ended, and the duration.
– : Delete the call log.
Note
• If you have new missed calls, displaying the
Missed call log clears the Missed Call button
from the HOME screen. See "HOME Screen
(Page 29)".
Document Version 2010-01 Operating Instructions 65
Basic Feature Operation