Panasonic KX-NT400

2. Press Make a conference.
3. Go on-hook.
The other conference participants can continue
talking.
Note
• When you leave a conference, the status of the
first conference participant changes to
(on hold). The statuses of the other parties do
not change.
To return to a conference
1. On the Calls screen, select the call on hold.
2. Press Retrieve the Call.
–or–
Go off-hook.
Usage tips
• When a conference call includes more than 1
internal call, you can also return to the conference
by simply going off-hook.
To leave a conference and not be able to return
1. Press
(TRANSFER).
2. Go on-hook.
Note
• To leave a conference call involving two outside
parties and have the conversation continue,
your extension must be enabled to transfer calls
to CO lines through COS programming.
Locking Operations
(Application Lock)
The Application Lock feature lets you restrict operation
to only a few operation screens. When you set the
Application Lock, you can still access some screens,
such as the HOME and Calls screens.
If you try to access a screen that is locked, you will be
prompted for a password to turn off Application Lock.
To use the Application Lock, you must enable the
Application Lock feature. For details, see "Password
Settings (Page 113)".
To set the Application Lock
1. On the HOME screen, press .
To cancel the Application Lock
1. On the HOME screen, press
, or access a
screen that is locked.
2. On the Unlock Application window, enter the
Application Lock password.
3. Press OK.
Note
• If you enter the wrong password a
pre-programmed number of times, your
extension will become locked. To unlock your
extension, the PIN and PIN lock for your
extension must be cleared. For details, consult
your manager.
Document Version 2010-01 Operating Instructions 75
Basic Feature Operation