Customizing the Flexible Buttons
You can customize the flexible buttons that are displayed on the Calls screen or the Feature Key screen (in
Call List mode) by assigning functions to them. They can then be used to make or receive outside calls or as
feature buttons.
You can customize the flexible buttons on the Programming screen.
Note
• The flexible buttons work as Single-CO (S-CO) button by default.
Programming Screen
The flexible buttons’ lights on the Programming screen indicate their status:
Button Name
Light Status Meaning
FWD/DND Off Both features are not set.
Red on FWD mode
Flashing red slowly DND mode
AUTO ANS/MUTE Off Normal
Red on Auto Answer ON
INT' (INTERCOM) Green on The extension is seized by you.
To customize flexible buttons
1. Press the Options tab > Administrator Options > Programming.
2. On the Programming screen, press PROG.
Document Version 2010-01 Operating Instructions 133
Customizing the Telephone
To Next Page
Loading...
