Panasonic KX-NT400

Making a Call from the Contact
List
The KX-NT400 provides the following 2 types of contact
lists:
• Local Directory
The local directory contains the following types of
contacts:
– Your personal contacts
– System speed dialing directory contacts
– Extension number directory contacts
For details about adding personal contacts, see
"Contact List (Page 108)".
• LDAP Directory
If you have configured the settings for an LDAP
server, you can view the contacts stored on that
server.
For details about configuring LDAP server settings,
see "LDAP Server Settings (Page 121)".
Note
• When you display the Contacts tab, the
previously selected directory is displayed. The
first time you display the Contacts tab, the local
directory is displayed.
Making a Call from the Local
Directory
1. Press the Contacts tab.
2. If necessary, press the directory selection list and
select Directory.
3. To search for a contact, start entering the contact’s
name. For details about entering characters, see
"Entering Text (Page 60)".
Note
• The contact list is searched in real time.
• The characters you enter are displayed in
.
• You can enter up to 3 characters to search
for.
• You can delete a character by pressing
(LEFT) on the Navigator key.
4. Select the contact you want to call.
A window with a list of available destinations
appears.
5. Select the desired destination and go off-hook.
Destination selection for a personal contact
Destination selection for a contact from the
system speed dialing directory or extension
directory
Note
• You can start a chat session by pressing
Start Chat. For details, see "Chat
(Page 83)".
6. To end the call, go on-hook.
Usage tips
• If you select a contact and then go off-hook, the
contact will be dialed immediately. The first number
registered, in the order of office ® mobile ® home,
is dialed.
• You can add new contacts, and contacts from the
system speed dialing directory and extension
directory. For details, see "Contact List
(Page 108)".
Document Version 2010-01 Operating Instructions 63
Basic Feature Operation