Feature Programming
The following table explains the features that are available in programming mode and how to program them.
Note
• The default values are displayed in bold.
Item
Programming
Input
Selection & Parameter
Display Language
Selection
Note
Changing this setting only
affects the language used
in the sub-display.
Select the language via the Language settings.
Display Switching Mode
Set whether the call duration for outside calls is
displayed on the Calls screen in Line Buttons mode.
If the Calls screen is set to Call List mode, the duration
is always displayed for both internal and external
calls, regardless of this setting.
• Calls Screen (Page 37)
Speed Dial
Store frequently dialed numbers in your contact list.
• Contact List (Page 108)
Hot Line
Would you like to dial a preset
number simply by going
off-hook?
desired no. (max. 32 digits)
Do not use
Use
Calling Line Identification
Restriction (CLIR)
Should you prevent your
number being displayed on
the called party’s telephone?
No—Allows your number
to be displayed
Yes—Prevent your number
being displayed
Calling/Connected Line
Identification Presentation
(CLIP/COLP)
Which number should be
displayed on the called and
calling party’s telephone?
Caller ID assigned to your
extension
Caller ID assigned on the CO
line being used
126 Operating Instructions Document Version 2010-01
Customizing the Telephone
To Next Page
Loading...
