Panasonic KX-NT400

2. Select the list number of the desired party from the
buttons 1–6.
3. Select the desired party and go off-hook.
4. To end the call, go on-hook.
Usage tips
• For details about creating One-touch dialing
buttons, see "Customizing the Flexible Buttons
(Page 133)".
Receiving Calls
This section explains the basic methods for receiving a
call.
Receiving a Call
When you have an incoming call, the Call Alert window
appears.
If you are viewing the Camera screen when an
incoming call arrives, the Call Alert window appears
along the bottom of the screen.
1. Go off-hook, or, on the Call Alert window, press
Answer.
2. To end the call, go on-hook.
Auto answer
You can have the KX-NT400 automatically answer an
incoming call.
• To enable Auto Answer: On the HOME screen,
press
.
• To disable Auto Answer: On the HOME screen,
press .
Note
• For intercom calls, the call is connected without
the KX-NT400 ringing.
• For outside calls, the call is connected after a
programmed number of rings.
Usage tips
• After you answer a call, the Calls screen appears.
For details, see "Calls Screen (Page 37)".
Document Version 2010-01 Operating Instructions 67
Basic Feature Operation