4. Select the flexible button you want to clear.
5. Press .
6. Press (ENTER) 2 times.
7. To continue clearing buttons, repeat the procedure from step 3.
To exit, press EXIT.
Usage tips
• You can also clear the number or feature assigned to a flexible button on the Calls screen or the Feature
Key screen (in Call List mode). For details, see "Calls Screen in Line Buttons Mode (Page 37)" and "Feature
Key Screen (Page 55)".
Entering Characters
The dial keys are used to enter characters and numbers. Each of the dial keys has multiple characters assigned
to it. To enter a character, press the appropriate dial key until the character you want appears. To enter another
character that is assigned to the same key, first press (RIGHT) to move the cursor to the right.
Character Tables
You can enter alphabetic characters and digits using the dial keys. Pressing a dial key repeatedly displays different
characters, as shown in the following tables.
While entering characters, you can move the cursor with (LEFT) and (RIGHT) on the Navigator key. On the
Calls screen, the Feature Key screen (in Call List mode), and the Programming screen, you can delete a
character by pressing (TRANSFER). On the other screens, you can delete a character by pressing (LEFT)
on the Navigator key. For a list of available characters, refer to the following pages. The tables show you the
characters available for each button.
Note
• You can switch the character table by pressing
.
Document Version 2010-01 Operating Instructions 145
Customizing the Telephone
To Next Page
Loading...
