Panasonic KX-NT400

Advanced Feature
Operation
Network Camera
You can view the video feeds from up to 20 registered
Panasonic Network Cameras (e.g., KX-HCM/BB-HCM/
BL-C series). For details about registering cameras,
see "IP Camera Settings (Page 116)".
For details about the buttons and icons on the
Camera screen, see "Camera Screen (Page 49)".
Network Camera Features
Camera Control
• You can control the selected camera, such as by
zooming in and out, tilting and panning.
• You can view and control a camera while on a call.
Doorphone/Contact Integration
• If a camera is connected to a doorphone or
registered to a contact in the contact list, the feed
from that camera is automatically displayed when
you receive a call from or make a call to that
doorphone or contact.
• You can open the door connected to a doorphone
from the Camera screen.
For details about registering cameras with contacts, see
"Contact List (Page 108)".
Note
• Depending on the camera model, some
operations might not be available.
• Some operations might not function due to
security reasons, etc. For details, consult your
administrator.
• If a camera feed does not display, see
"Troubleshooting (Page 183)" for assistance.
Selecting Cameras to View
You can use the Location list or quick-access buttons
to select the camera you want to view.
• Location list: A list of all cameras that you have
registered.
• Quick-access buttons: 4 buttons to which you can
assign frequently accessed cameras.
1. Press the Location drop-down list, and then select
the camera you want to view.
–or–
On the bottom of the screen, select the
quick-access button of the camera you want to
view.
You can assign which cameras are accessed with these
buttons. For details, see "IP Camera Settings
(Page 116)".
Note
• When on a call with a destination that has a
registered camera, the location "Incoming" (for
incoming calls) or "Outgoing" (for outgoing
calls) is added to the Location drop-down list
for the duration of the call.
Zooming In and Out
Use the following buttons to zoom in and out of the
image:
• : Zoom in
• : Zoom out
Document Version 2010-01 Operating Instructions 81
Advanced Feature Operation