Panasonic KX-NT400 - Page 138

Button Description & Programming Input
Group FWD—Intercom
calls
Used to forward the intercom calls to your group to a specified
destination.
Programming Input
+ Incoming call distribution group extension no.
The Group FWD button light shows the current status as follows:
• Off: No set
• Red on: FWD mode
Account
Used to enter an account code.
Programming Input
Conference
Used to establish a multiple party conversation.
Programming Input
Terminate
Used to disconnect the current call and make another call without
hanging up.
Programming Input
External Feature Access
(EFA)
Used to access special features offered by a host PBX or a telephone
company.
Programming Input
Call Park
Used to park or retrieve a call in a preset parking zone.
Programming Input
+ Parking zone no. (2 digits)
Call Park (Automatic Park
Zone)
Used to park a call in an idle parking zone automatically.
Programming Input
Call Log
Used to show the incoming call information.
Programming Input
The Call Log button light shows the current status as follows:
• Off: No incoming call. Or you have already viewed the call log.
• Red on: You have missed calls to view.
138 Operating Instructions Document Version 2010-01
Customizing the Telephone