Panasonic KX-NT400

Button Description & Programming Input
Two-way Transfer
*7
Used to record a conversation into the mailbox of a specific extension.
Programming Input
+ Voice mail floating extension no.
*8
The Two-way Transfer button light shows the current status as follows:
• Off: Not recording.
• On: Recording the conversation.
One-touch Two-way
Transfer
*7
Used to record a conversation into the mailbox of a specific extension
with one touch.
Programming Input
+ Voice mail floating extension no.
*8
+ + Extension no./
Incoming call distribution group extension no.
The One-touch Two-way Transfer button light shows the current
status as follows:
• Off: Not recording.
• On: Recording the conversation.
Live Call Screening (LCS)
*7
Used to monitor your own voice mailbox while an incoming caller is
leaving a message and, if desired, intercept the call.
Programming Input
The Live Call Screening (LCS) button light shows the feature status
as follows:
• Off: LCS is off.
• Flashing green rapidly: Alerting in the Private mode.
• Flashing green slowly: Monitoring.
• Red on: LCS is on.
Voice Mail Transfer
*7
Used to transfer a call to the mailbox of a specified extension.
Programming Input
+ Voice mail floating extension no.
*8
*1
The flexible buttons work as Single-CO (S-CO) button by default.
*2
"*", "#", FLASH/RECALL, PAUSE, Secret (INTERCOM) and TRANSFER can also be stored.
If you do not want to display the stored number when making a call, press the Secret (INTERCOM) button before and after the numbers
you wish to conceal.
If you need to enter an account code, you can enter the specified account code before the line access number.
Document Version 2010-01 Operating Instructions 143
Customizing the Telephone