Panasonic KX-NT400

Presence
For details, see "Presence Settings (Page 118)".
Presence Button Setting
Parameter Name Description Value Range Default Setting
Button Name Enter a name for the button. 1–16 characters –
*1
Presence Specify whether to set the presence status. Yes/No Yes
Presence Mode Specify the type of the presence status setting. Same as Button
Name, Available,
(Enter Characters)
–
*1
Presence Message Enter a presence message. 1–16 characters –
Forward/DND
Settings
Specify whether to set FWD/DND. Yes/No No
FWD/DND External
Mode
Specify the type of your presence for external
calls.
Always (All),
Busy,
No answer,
Busy/No answer,
Do not disturb,
Not Assigned
Not Assigned
Dial
(FWD/DND
External Number)
Enter the phone number to transfer calls for
external calls.
32 digits –
FWD/DND Internal
Mode
Specify the type of your presence for internal
calls.
Always (All),
Busy,
No answer,
Busy/No answer,
Do not disturb,
Not Assigned
Not Assigned
Dial
(FWD/DND Internal
Number)
Enter the phone number to transfer calls for
internal calls.
32 digits –
Feature Number
(check box)
Specify whether to set a Feature Number. Yes/No No
Feature Number Enter a feature number. 32 digits –
*1
For presence buttons 1–7, the default values are as follows:
• Button 1: Available
• Button 2: Will Return Soon
• Button 3: Gone Home
• Button 4: In a Meeting
• Button 5: In Conference
• Button 6: Urgent Only
• Button 7: Not at My Desk
174 Operating Instructions Document Version 2010-01
Appendix