Panasonic KX-NT400

Parameter Name Description Value Range Default Setting
VLAN Specify whether VLAN to be used. Enable, Disable Disable
VLAN ID
(Primary Port)
Edit the VLAN ID when VLAN is enabled. 1–4094 1
VLAN Priority
(Primary Port)
Edit the VLAN priority when VLAN is enabled. 0–7 7
VLAN ID
(Secondary Port)
Edit the VLAN ID when VLAN is enabled. 1–4094 2
VLAN Priority
(Secondary Port)
Edit the VLAN priority when VLAN is enabled. 0–7 0
Diffserv
(Primary Port)
Specify whether Diffserv is used. Enable, Disable Disable
DS Field
(Primary Port)
Edit the DS Field when Diffserv is enabled. 0–7.0–7 5.0
Maintenance
For more details, see "Maintenance (Page 162)".
Parameter Name
Description Value Range Default Setting
MAC Address
(VoIP)
Shows the KX-NT400’s VoIP MAC address. – –
MAC Address
(Application)
Shows the KX-NT400’s Application MAC
address.
– –
LDAP Server Settings
For more details, see "LDAP Server Settings (Page 121)".
Parameter Name
Description Value Range Default Setting
Display Name Enter the LDAP server name to be displayed. 1–20 characters –
Server Name/
Address
Enter the IP address of the LDAP server. Valid IP Address –
Port Number Enter the port number to communicate with
the LDAP server.
389, 636,
1024–65535
389
Server Logon Select whether the LDAP server requires
authentication.
– –
Account Name Enter the account name when the server
requires authentication.
0–128 characters –
Password Enter the password when the server requires
authentication.
1–128 characters –
Document Version 2010-01 Operating Instructions 177
Appendix