Panasonic KX-NT400

for base unit
for base unit
148 mm (5
13
/
16
in)
94 mm (3
11
/
16
in)
83 mm (3
1
/
4
in)
WALL MOUNTING TEMPLATE
1. Drive the screws into the wall as indicated.
2. Hook the unit onto the screw heads.
Note:
Make sure to set the print size to
correspond with the size of this page. If the
dimensions of the paper output still deviate
slightly from the measurements indicated
here, use the measurements indicated
here.
One screw here
One screw here
One screw here