Feature Operation
Conference
You can add one or more parties to your
conversation.
• Conference Call (Multiple Party
Conversation) (Page 73)
To establish a conference
(TRANSFER) + phone no. + Talk + (TRANSFER)
+
To disconnect one party in Line Buttons mode (3-party
conference only)
(TRANSFER) once or twice to establish a conference
with the party to be disconnected + FLASH + flexible button/
INT' (corresponding to original party)
Conference, Unattended
The person who originated a conference can
leave the conference, and allow the other parties
to continue the conversation.
To leave a conference (3- to 7-party conference)
Feature key screen
*1
+ [Conference] + go on-hook
To return while others are talking
Feature key screen
*1
+ flexible button/INT' (corresponding
to original party)
Connected Line Identification Restriction
(COLR)
When receiving an outside call, you can select
whether the caller can see your telephone
number or not.
To show
To prevent
Data Line Security
You can protect the line against audible
notification tones, such as a call waiting tone
during a conversation.
Set this feature if your extension has a data
communication device, such as a PC or fax
machine connected to ensure secure data
transmission.
To set
To cancel
Dial Tone Transfer
The manager extension can change the
restriction level, permitting an extension to make
a call.
Feature key screen
*1
+ [Toll Restriction]
Document Version 2010-01 Operating Instructions 95
PBX Feature List
To Next Page
Loading...
