Panasonic KX-TDA100

2.8 [1] Configuration
156 PC Programming Manual
Programming Manual References
None
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T301
Specifies the maximum time that the PBX waits for a reply after making a call to ISDN.
Value Range
0–18000 × 100 ms
Maintenance Console Location
2.8.13 [1-1] Slot—Card Property - BRI type/PRI type
Programming Manual References
None
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T302
Specifies the maximum time allowed between each digit on an incoming call. Applies to overlap
receiving.
Value Range
0–600 × 100 ms
Maintenance Console Location
2.8.13 [1-1] Slot—Card Property - BRI type/PRI type
Programming Manual References
None
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T303
Specifies the maximum time that the PBX waits for a reply after sending the SETUP (call setting)
message to ISDN.
Value Range
0–600 × 100 ms