Panasonic KX-TDA100

2.8 [1] Configuration
PC Programming Manual 157
Maintenance Console Location
2.8.13 [1-1] Slot—Card Property - BRI type/PRI type
Programming Manual References
None
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T304
Specifies the maximum time allowed between each digit on an outgoing call. Applies to overlap
sending.
Value Range
0–3000 × 100 ms
Maintenance Console Location
2.8.13 [1-1] Slot—Card Property - BRI type/PRI type
Programming Manual References
None
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T305
Specifies the maximum time that the PBX waits for a reply after sending the DISC (disconnection)
message to ISDN.
Value Range
0–3000 × 100 ms
Maintenance Console Location
2.8.13 [1-1] Slot—Card Property - BRI type/PRI type
Programming Manual References
None
Feature Guide References
None
ISDN CO / QSIG Master / QSIG Slave—T308
Specifies the maximum time that the PBX waits for a reply after receiving the Release message from
ISDN.