Panasonic KX-TDA100

3.2 Feature Programming References
PC Programming Manual 819
• 2.9.10 [2-6-3] Numbering Plan—B/NA DND Call Feature
– BSS / OHCA / Whisper OHCA / DND Override
– BSS / OHCA / Whisper OHCA / DND Override-2
• 2.11.1 [4-1-1] Wired Extension—Extension Settings
– Option 2—Manual C. Waiting for Extension Call
– Option 2—Automatic C. Waiting
– Option 4—Call Waiting Tone Type
• 2.11.10 [4-2-1] Portable Station—Extension Settings
– Option 2—Manual C. Waiting for Extension Call
– Option 2—Automatic C. Waiting
– Option 4—Call Waiting Tone Type
Feature Guide Reference
1.8.4.2 Call Waiting Tone
Caller ID
• 2.9.4 [2-3] Timers & Counters—Miscellaneous
– Caller ID—Waiting to receive
– Caller ID—Visual Caller ID Display
• 2.9.17 [2-9] System Options—Option 4—Private Network—Public Call through Private
Network—Minimum Public Caller ID Digits
• 2.9.18 [2-10] Extension CID Settings
• 2.10.1 [3-1-1] Trunk Group—TRG Settings—Main—Caller-ID Modification Table
• 2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 7
– Extension Caller ID Sending
– Incoming Call Wait Timer for Extension Caller ID
• 2.13.1 [6-1] System Speed Dial
• 2.10.3 [3-1-3] Caller ID Modification
Feature Guide Reference
1.18.1 Caller ID
Calling Line Identification (CLI) Distribution
• 2.13.1 [6-1] System Speed Dial
– Name
– CO Line Access Number + Telephone Number
– CLI Destination
• 2.17.2 [10-2] DIL Table & Port Settings—DIL—CLI Ring for DIL—Day, Lunch, Break, Night
• 2.17.3 [10-3] DDI / DID Table—CLI Ring for DDI/DID—Day, Lunch, Break, Night
• 2.17.6 [10-4] MSN Table—CLI Ring for MSN—Day, Lunch, Break, Night
Feature Guide Reference
1.1.1.5 Calling Line Identification (CLI) Distribution
Calling Party Control (CPC) Signal Detection
• 2.8.11 [1-1] Slot—Port Property - LCO Port—CPC Signal Detection Time—Outgoing,
Incoming
• 2.8.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)