Panasonic KX-TDA100 - Page 828

3.2 Feature Programming References
828 PC Programming Manual
• 2.11.17 [4-3] DSS Console—Type
• 2.14.5 [7-5] Miscellaneous—TRS Check after EFA
Feature Guide Reference
1.11.7 External Feature Access (EFA)
External Relay Control
• 2.8.41 [1-1] Slot—Card Property - OPB3 (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Device Type
• 2.8.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)—For Output (EIO)—Device
Typ e
• 2.9.8 [2-6-1] Numbering Plan—Main—Features—External Relay Access
• 2.9.11 [2-7-1] Class of Service—COS Settings—Extension Feature—External Relay
Access
• 2.12.6 [5-4] External Relay
Feature Guide Reference
1.17.10 External Relay Control
External Sensor
• 2.8.41 [1-1] Slot—Card Property - OPB3 (KX-TDA100/KX-TDA200/KX-TDA600 only)
– Input Signal Decision Time
– Input Signal Detection Reopening Time
• 2.8.45 [1-1] Slot—Card Property - DPH type (KX-TDA30 only)
– For Sensor (EIO)—Input Signal Decision Time
– For Sensor (EIO)—Input Signal Detection Reopening Time
• 2.9.4 [2-3] Timers & Counters—Miscellaneous—External Sensor—Ring Duration
• 2.9.16 [2-8-3] Ring Tone Patterns—Call from Others—External Sensor—Ring Tone Pattern
Plan 1–8
• 2.12.7 [5-5] External Sensor
Feature Guide Reference
1.17.9 External Sensor
F
Flash/Recall/Terminate
• 2.8.11 [1-1] Slot—Port Property - LCO Port—Disconnect Time
• 2.8.19 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Disconnect Time
• 2.8.25 [1-1] Slot—Port Property - E1 Port—Disconnect Time
• 2.8.28 [1-1] Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—
Disconnect Time
• 2.8.31 [1-1] Slot—Port Property - DID Port—Disconnect Time
• 2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 6—Flash Mode during CO
Conversation
• 2.11.5 [4-1-4] Wired Extension—Flexible Button—Type
• 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 6—Flash Mode during CO
Conversation