2.7 [1] Configuration
PC Programming Manual 165
Answer Detection Timer
Specifies the length of time required by the PBX to recognize the answer signal. This allows the
telephone company to have enough time to accept the dialed digits correctly.
Default
32 ms
Value Range
32 × n (n=1–255) ms
Maintenance Console Location
2.7.16 [1-1] Slot—T1 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
Wink Signal Width
Specifies the length of a wink signal.
Default
224 ms
Value Range
32 × n (n=4–9) ms
Maintenance Console Location
2.7.16 [1-1] Slot—T1 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
None
DTMF Tone—DTMF Inter-digit Pause
Specifies the length of the DTMF inter-digit pause. This allows the telephone company to have
enough time to accept the dialed digits correctly.
Default
112 ms
To Next Page
Loading...
