Panasonic KX-UT113 - SIP Setting; SIP User Agent; SIP Settings [Line 1]-[Line X]

4.5.1.1 SIP Setting
SIP User Agent
Description Specifies the text string to send as the user agent in the headers of SIP
messages.
Value Range Max. 40 characters
Note
• You cannot leave this field empty.
• If "{mac}" is included in this field, it will be replaced with the
unit’s MAC address in lower
-case.
• If "{MAC}" is included in this field, it will be replaced with the
unit’s MAC address in upper-case.
• If "{MODEL}" is included in this field, it will be replaced with the
unit’s model name.
• If "{fwver}" is included in this field, it will be replaced with the
firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Configuration File Reference SIP_USER_AGENT (Page 237)
4.5.2 SIP Settings [Line 1]–[Line x]
This screen allows you to change the SIP settings that are specific to each line. The number of lines available
varies depending on the phone being used, as follows:
• KX-UT113/KX-UT123: 1–2
• KX-UT133/KX-UT136: 1–4
• KX-UT248: 1–6
Note
• When
registering multiple phone numbers on a KX-UT133/KX-UT136/KX-UT248, it is necessary to set
up DN buttons (flexible buttons). Otherwise, calls cannot be made.
102 Administrator Guide Document Version 2012-02
4.5.2 SIP Settings [Line 1]–[Line x]