Panasonic KX-UT113 - Host_Name; Dhcp_Dns_Enable; Static_Ip_Address

HOST_NAME
Value Format String
Description Specifies the host name for the unit to send to the DHCP server.
Note
• This
setting is available only when "CONNECTION_TYPE" is set
to "1".
Value Range Max. 63 characters
Note
• An empty string is not allowed.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
Default Value {MODEL}
Web User Interface Reference Host Name (Page 77)
DHCP_DNS_ENABLE
Value Format Boolean
Description Specifies whether to receive DNS server addresses automatically or to
assign a DNS server addresses (up to 2) manually.
Note
• This
setting is available only when "CONNECTION_TYPE" is set
to "1" and when "NW_SETTING_ENABLE" is set to "N".
Value Range
• Y (Use "USER_DNS1_ADDR" or, "USER_DNS1_ADDR" and
"USER_DNS2_ADDR")
• N (Receive DNS server address automatically)
Default Value
N
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Web User Interface Reference Domain Name Server (Page 78)
STATIC_IP_ADDRESS
Value Format String
Description Specifies the IP address for the unit.
Note
• This
setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
• When you specify this parameter, you must specify
"STATIC_SUBNET" together in a configuration file.
188 Administrator Guide Document Version 2012-02
5.4.1 IP Settings