5.4.8 Miscellaneous Network Settings
NW_SETTING_ENABLE
Value Format Boolean
Description Specifies whether to enable the network settings from the unit.
Note
• If
you change this setting to "N" when the network settings (with
the exception of "HOST_NAME") in 5.4.1 IP Settings have been
made through Web user interface programming, clear these
settings once by performing Reset Web Settings from the Web
user interface, and then change this setting to "N".
Value Range
• Y (Enable network settings)
• N (Disable network settings)
Default Value
Y
CUSTOM_WEB_PAGE
Value Format Integer
Description Specifies whether to enable the settings in 4.3.1 Basic Network
Settings
and 4.4.5 Time Adjust Settings from the Web user interface
when logged in with the User account.
Value Range 0–3
– 0: Enable "Basic Network Settings
" and "Time Adjust Settings"
– 1: Disable "Basic Network Settings"
– 2: Disable "Time Adjust Settings"
– 3: Disable "Basic Network Settings" and "Time Adjust Settings"
Default Value 0
5.5 Telephone Settings
5.5.1 Call Control Settings
VM_SUBSCRIBE_ENABLE
Value Format Boolean
Description Specifies whether to send the SUBSCRIBE request to a voice mail
server.
Note
• Your phone system must support voice mail.
Document Version 2012-02 Administrator Guide 199
5.5.1 Call Control Settings