Panasonic KX-UT113 - Add_User_Phone_N; Sdp_User_Id_N; Sub_Interval_Rate_N

Value Range
• Y (Add the "Privacy" header)
• N (Do not add the "Privacy" header)
Default Value
N
ADD_USER_PHONE_n
Parameter Name Example ADD_USER_PHONE_1, ADD_USER_PHONE
_2, …,
ADD_USER_PHONE_6
Value Format Boolean
Description Specifies whether to add "user=phone" to the SIP URI in SIP
messages.
Value Range
• Y (Add "user=phone
")
• N (Do not add "user=phone")
Note
• SIP URI example:
– "sip:1111@tokyo.example.com;user=phone",
when set to "Y"
– "sip:1111@tokyo.example.com", when set to "N"
Default Value
N
SDP_USER_ID_n
Parameter Name Example SDP_USER_ID_1, SDP_USER_ID
_2, …, SDP_USER_ID_6
Value Format String
Description Specifies the user ID used in the "o=" line field of SDP.
Value Range Max. 32 characters (except ", &, ', :, <, >, and space)
Default Value -
SUB_INTERVAL_RATE_n
Parameter Name Example SUB_INTERVAL_RATE_1, SUB_INTERVAL_RATE
_2, …,
SUB_INTERVAL_RATE_6
Value Format Integer
Description Specifies the percentage of the "expires" value after which to refresh
subscriptions by sending a new SUBSCRIBE message in the same
dialog.
Value Range 1–100
Default Value 90
Document Version 2012-02 Administrator Guide 253
5.7.2 SIP Settings