Panasonic KX-UT113 - Phone_Number_N; Sip_Uri_N

Value Range Max. 40 characters
Note
• An empty string is not allowed.
• If "{mac}" is included in this parameter, it will be replaced with
the unit’s MAC address in lower
-case.
• If "{MAC}" is included in this parameter, it will be replaced with
the unit’s MAC address in upper-case.
• If "{MODEL}" is included in this parameter, it will be replaced
with the unit’s model name.
• If "{fwver}" is included in this parameter, it will be replaced with
the firmware version of the unit.
Default Value Panasonic_{MODEL}/{fwver} ({mac})
Web User Interface Reference SIP User Agent (Page 102)
PHONE_NUMBER_n
Parameter Name Example PHONE_NUMBER_1, PHONE_NUMBER
_2, …, PHONE_NUMBER_6
Value Format String
Description Specifies the phone number to use as the user ID required for
registration to the SIP registrar server.
Note
• When registering using a user ID that is not a phone number,
you should use the "SIP_URI_n" setting.
Value Range Max. 32 characters
Default Value Empty string
Web User Interface Reference Phone Number (Page 103)
SIP_URI_n
Parameter Name Example SIP_URI_1, SIP_URI_2, …, SIP_URI_6
Value Format String
Description Specifies the unique ID used by the SIP registrar server, which consists
of "sip:", a user part, the "@" symbol, and a host part, for example,
"sip:user@example.com
".
Note
• When registering using a user ID that is not a phone number,
you should use this setting.
• In a SIP URI, the user part ("user" in the example above) can
contain up to 63 characters, and the host part ("example.com
"
in the example above) can contain up to 127 characters.
Value Range Max. 195 characters (except ", &, ', :, ;, <, >, and space)
238 Administrator Guide Document Version 2012-02
5.7.2 SIP Settings