Panasonic KX-UT113 - Time Adjust Settings; Ntp_Addr; Time_Sync_Intvl; Time_Query_Intvl

Value Range Max. 500 characters
Note
• The format must be RFC 1738 compliant, as follows:
"<scheme>://<user>:<password>@<host>:<port>/<url
-path>"
– "<user>" must be less than 128 characters.
– "<password>" must be less than 128 characters.
– "<user>:<password>@" may be empty.
– The total of "<scheme>://" and "<host>:<port>/<url-path>"
must be less than 245 characters.
– ":<port>" can be omitted if you do not need to specify the
port number.
Default Value Empty string
5.4.6 Time Adjust Settings
NTP_ADDR
Value Format String
Description Specifies the IP address or FQDN of the NTP server.
Value Range Max. 127 characters (IP address in dotted-decimal notation or FQDN)
Default Value Empty string
Web User Interface Reference NTP Server Address (Page 98)
TIME_SYNC_INTVL
Value Format Integer
Description Specifies the interval, in seconds, to resynchronize after having
detected no reply from the NTP server.
Value Range 10–86400
Default Value 60
TIME_QUERY_INTVL
Value Format Integer
Description Specifies the interval, in seconds, between synchronizations with the
NTP server.
Value Range 10–86400
Default Value 43200
Web User Interface Reference Synchronization Interval (Page 97)
Document Version 2012-02 Administrator Guide 197
5.4.6 Time Adjust Settings