Panasonic KX-UT113 - Static_Subnet; Static_Gateway

Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Web User Interface Reference Static IP Address (Page 78)
STATIC_SUBNET
Value Format String
Description Specifies the subnet mask for the unit.
Note
• This setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" together in a configuration file.
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Web User Interface Reference Subnet Mask (Page 79)
STATIC_GATEWAY
Value Format String
Description Specifies the IP address of the default gateway for the network where
the unit is connected.
Note
• This
setting is available only when "CONNECTION_TYPE" is set
to "0" and when "NW_SETTING_ENABLE" is set to "N".
• When you specify this parameter, you must specify
"STATIC_IP_ADDRESS" and "STATIC_SUBNET" together in a
configuration file.
Value Range IP address in dotted-decimal notation
Default Value Empty string
Phone User Interface
Reference
Configuring the Network Settings of the Unit (Page 19)
Web User Interface Reference Default Gateway (Page 79)
Document Version 2012-02 Administrator Guide 189
5.4.1 IP Settings