Panasonic KX-UT113 - Flexible Button Settings (KX-UT133;KX-UT136;KX-UT248 Only); Flex_Button_Facility_Actx

Note
• It is necessary to specify 2 digits for each of the 30 acoustic
settings
(i.e., a total of 60 digits in succession). Even if you are
not changing a value, you must enter "00". The digit order
(offset) of each setting is as follows:
– 00 = Handset Sending Level (Wide Band)
– 02 = Handset Sending Level (Narrow Band)
– 04 = Handset Receiving Level (Wide Band)
– 06 = Handset Receiving Level (Narrow Band)
– 08 = Handset Sidetone Level (Wide Band)
– 10 = Handset Sidetone Level (Narrow Band)
– 12 = EHS Sending Level (Wide Band)
– 14 = EHS Sending Level (Narrow Band)
– 16 = EHS Receiving Level (Wide Band)
– 18 = EHS Receiving Level (Narrow Band)
– 20 = EHS Sidetone Level (Wide Band)
– 22 = EHS Sidetone Level (Narrow Band)
– 24 = Headset Sending Level (Wide Band)
– 26 = Headset Sending Level (Narrow Band)
– 28 = Headset Receiving Level (Wide Band)
– 30 = Headset Receiving Level (Narrow Band)
– 32 = Headset Sidetone Level (Wide Band)
– 34 = Headset Sidetone Level (Narrow Band)
– 36 = Reserved
– 38 = Reserved
– 40 = Reserved
– 42 = Reserved
– 44 = Reserved
– 46 = Reserved
– 48 = SP-PHONE Sending Level (Wide Band)
– 50 = SP-PHONE Sending Level (Narrow Band)
– 52 = SP-PHONE Receiving Level (Wide Band)
– 54 = SP-PHONE Receiving Level (Narrow Band)
– 56 = Reserved
– 58 = Ringer Volume Level
For example, the following line in a configuration file would
change the Handset Receiving Level (Wide Band) gain -3
decibels.
ADJDATA_GAIN = "0000FD00…00"
(… is the equivalent of fifty 0s.)
Default Value Empty string
5.5.5 Flexible Button Settings (KX-UT133/KX-UT136/KX-UT248
only)
FLEX_BUTTON_FACILITY_ACTx
Value Format String
Document Version 2012-02 Administrator Guide 219
5.5.5 Flexible Button Settings (KX-UT133/KX-UT136/KX-UT248 only)