Panasonic KX-UT113 - Firm_Version; Firm_Upgrade_Auto; Firm_File_Path

FIRM_VERSION
Value Format String
Description Specifies the firmware version of the unit.
Note
• Changing this setting may require restarting the unit.
Value Range 00.000–15.999
Default Value Empty string
FIRM_UPGRADE_AUTO
Value Format Boolean
Description Specifies whether to display a confirmation message asking the user
to
perform a firmware update (manual) or perform the firmware update
without asking the user (automatic) when the unit detects a newer
version of firmware.
Note
• This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
• Changing this setting may require restarting the unit.
Value Range
• Y (Enable automatic firmware update)
• N (Disable automatic firmware update)
Default Value
Y
Web User Interface Reference Update Type (Page 144)
FIRM_FILE_PATH
Value Format String
Description Specifies the URL where the firmware file is stored.
Note
• This setting is available only when
"FIRM_UPGRADE_ENABLE" is set to "Y".
• Changing this setting may require restarting the unit.
174 Administrator Guide Document Version 2012-02
5.3.4 Firmware Update Settings