Value Range
• English (US)
• English (UK)
• Deutsch
• Français
• Español
• Italiano
• Portugués
• Русский
Default Value English (US)
4.4.2 Administrator Password
This
screen allows you to change the password used to authenticate the Administrator account when logging
in to the Web user interface.
Note
• For
security reasons, the characters entered for the password are masked by special characters, which
differ depending on the Web browser.
• After you change the administrator password, the next time you access the Web user interface, the
authentication dialog box appears. Two consecutive login failures will result in an error ("401
Unauthorized"). This restriction only applies the first time you attempt to log in after changing the
password. In all other circumstances, an error occurs after 3 unsuccessful login attempts.
4.4.2.1 Change Administrator Password
Current Password
Description Specifies the current password to use to authenticate the Administrator
account when logging in to the Web user interface.
Value Range 6–16 characters (except ", &, ', :, <, >, and space)
Default Value adminpass
Configuration File Reference ADMIN_PASS (Page 165)
New Password
Description Specifies the new password to use to authenticate the Administrator
account when logging in to the Web user interface.
Document Version 2012-02 Administrator Guide 93
4.4.2 Administrator Password
To Next Page
Loading...
