Panasonic KX-UT113 - Reset Web ID;Password

3.1.4 Reset Web ID/Password
Reset
Web ID/Password resets all the IDs and passwords required for users and administrators to access the
Web user interface (® see Access Levels (IDs and Passwords) in 1.1.6.3 Before Accessing the Web
User Interface) to their factory defaults. You can perform this operation from the unit.
To perform Reset Web ID/Password
1. Press
Setting
or
Setup
.
2. Press [#][7][3][9].
3. Press [ ] or [ ] to select "Yes" to reset the Web ID/Password, and then press [ENTER].
All the IDs and passwords are reset, and the unit will restart.
Notice
• For security reasons, it is recommended that the passwords are set again immediately (® see
4.4.2 Administrator Password or 4.4.3 Change User Password).
Document Version 2012-02 Administrator Guide 57
3.1.4 Reset Web ID/Password