Panasonic KX-UT113 - Sip_Add_Diversion_N; Sip_Response_Code_Dnd; Sip_Response_Code_Call_Reject

Description Specifies whether to allow re-INVITE for calls on hold.
Value Range
• Y (Enable SIP Hold Receive)
• N (Disable SIP Hold Receive)
Default Value
Y
SIP_ADD_DIVERSION_n
Parameter Name Example SIP_ADD_DIVERSION_1, SIP_ADD_DIVERSION
_2, …,
SIP_ADD_DIVERSION_6
Value Format Integer
Description Specifies whether to add Diversion header information.
Value Range 0–2
– 0: Do not add Diversion header information
– 1: Use own diversion information only for the Diversion header
– 2: Add diversion information to existing Diversion header
Default Value 1
SIP_RESPONSE_CODE_DND
Value Format Integer
Description Selects the response code when a call is received in Do Not Disturb
mode.
Value Range 400–699
Default Value 403
SIP_RESPONSE_CODE_CALL_REJECT
Value Format Integer
Description Selects the response code when a call is rejected.
Value Range 400–699
Default Value 603
Document Version 2012-02 Administrator Guide 259
5.7.2 SIP Settings