Panasonic KX-UT113 - Voip Settings; RTP Settings; RTP Packet Time; Minimum RTP Port Number

Default Value No
Configuration File Reference SIP_DETECT_SSAF_n (Page 255)
4.5.3 VoIP Settings
This screen allows you to change the VoIP settings that are common to all lines.
4.5.3.1 RTP Settings
RTP Packet Time
Description Selects the interval, in milliseconds, between transmissions of RTP
packets.
Value Range
• 20
• 30
• 40
Default Value 20
Configuration File Reference RTP_PTIME (Page 229)
Minimum RTP Port Number
Description Specifies the lowest port number that the unit will use for RTP packets.
Note
• If port numbers are specified in [Channel 1–25] in
4.3.6.3 External RTP Port, this setting is ignored and the
corresponding external RTP port is enabled.
• The
available channel number varies depending on the type of
the unit being used.
112 Administrator Guide Document Version 2012-02
4.5.3 VoIP Settings