Panasonic KX-UT113 - Troubleshooting Common Issues; General Use Problems and Solutions

PC (Priority) (KX-UT123/KX-UT133/KX-UT136/KX-UT248 only)
Description Selects the priority number for the PC.
Note
• You
cannot set this parameter if [Enable IEEE802.1X] is set to
[Yes] (KX-UT248 only).
Value Range 0–7
Default Value 0
Configuration File Reference VLAN_PRI_PC (Page 193)
4.3.3 IEEE802.1X Settings (KX-UT248 only)
This screen allows you to configure settings relating to the
IEEE 802.1X networking protocol.
4.3.3.1 IEEE802.1X Settings
Enable IEEE802.1X
Description Selects whether to use the IEEE 802.1X protocol.
Note
• You cannot set this parameter if [Enable VLAN] is set to
[Yes].
Value Range
• Yes
• No
Default Value No
Configuration File Reference IEEE8021X_ENABLE (Page 193)
Document Version 2012-02 Administrator Guide 83
4.3.3 IEEE802.1X Settings (KX-UT248 only)