Panasonic KX-UT113 - Auto_Call_Hold; Redialkey_Calllog_Enable; Onhook_Transfer_Enable; Disconnection_Mode

Default Value
Y
AUTO_CALL_HOLD
Value Format Boolean
Description Selects whether calls are disconnected or held when a DN button is
pressed while having a conversation.
Value Range
• Y (Enable Auto Call Hold)
• N (Disable Auto Call Hold)
Default Value
N
REDIALKEY_CALLLOG_ENABLE
Value Format Boolean
Description Specifies whether the call log is displayed when the Redial button is
pressed while on
-hook.
Value Range
• Y (Displays outgoing call log by pressing the Redial button.)
• N (Not display call log by pressing the Redial button.)
Default Value
N
ONHOOK_TRANSFER_ENABLE
Value Format Boolean
Description Specifies whether transfer operations are permitted while on-hook.
Value Range
• Y (Enable On-hook Transfer)
• N (Disable On-hook Transfer)
Default Value
Y
DISCONNECTION_MODE
Value Format Integer
Description Selects the tone heard (reorder tone or busy tone) when a dial operation
fails.
Value Range 1–2
– 1: Mode1 (ROT)
– 2: Mode2 (BT)
Default Value 1
204 Administrator Guide Document Version 2012-02
5.5.1 Call Control Settings