Panasonic KX-UT113 - Annex_G_Stun_Enable; Annex_G_Stun_Serv_Addr; Annex_G_Stun_Serv_Port; Annex_G_Stun_User_Id

ANNEX_G_STUN_ENABLE
Value Format Boolean
Description Specifies whether or not the CPE can use STUN. This applies only to
the
use of STUN in association with the ACS to allow UDP Connection
Requests.
Value Range
• Y (Enable)
• N (Disable)
Default Value
N
ANNEX_G_STUN_SERV_ADDR
Value Format String
Description Specifies the host name or IP address of the STUN server for the CPE
to send Binding Requests.
Note
• This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
• If the value for this setting is an empty string and
"ANNEX_G_STUN_ENABLE"
is set to "Y", the CPE must use the
address of the ACS extracted from the host portion of the ACS
URL.
Value Range Max. 256 characters
Default Value Empty string
ANNEX_G_STUN_SERV_PORT
Value Format Integer
Description Specifies the port number of the STUN server for the CPE to send
Binding Requests.
Note
• This setting is available only when
"ANNEX_G_STUN_ENABLE" is set to "Y".
Value Range 1–65535
Default Value 3478
ANNEX_G_STUN_USER_ID
Value Format String
Document Version 2012-02 Administrator Guide 185
5.3.6 Management Server Settings