• Button 1 is set to log in and log out of an ACD group on line 1.
• Button 2 is set to enable or disable talking using the headset.
• Buttons 3 and 4 are set to make/receive calls on line 1 using ringtone 1.
• Buttons 5 and 6 are set to make/receive calls on line 2 using ringtone 2.
• Buttons 7 and 8 are set to make calls to a certain destination using the One-Touch Dialing feature.
• Buttons 9, 10 and 11 are set to show the status of a certain extension. They can also be used to call that
extension and transfer calls to it.
*1
*1
You
can also assign extension numbers automatically to BLF buttons using the information in the server's resource list without having
to input information here.
Document Version 2013-03 Administrator Guide 285
6.3.1 Flexible Button Settings
To Next Page
Loading...
