6. Drive/Shutter/Image Stabilizer – Image Stabilizer
248
[Operation Mode]
Set the stabilization movement (blur) to match the recording method
(normal, panning).
•
The [Operation Mode] that can be used differ depending on the lens used.
• When using lenses with an O.I.S. switch, the camera’s operation mode cannot be
set to [OFF]. Set the switch on the lens to [OFF].
• When the following functions are being used, [Operation Mode] switches to [ ]
([Normal]):
– [ ] mode
– Video recording/[6K/4K PHOTO]/[Post-Focus]
• When the following functions are being used, [E-Stabilization (Video)] is not
available:
– [Variable Frame Rate]
– [Live Cropping]
[Normal]
Corrects vertical, horizontal, and rotational camera
shake.
This function is suitable for normal recording.
[Panning (Left/
Right)]
Corrects vertical camera shake.
This is suitable for horizontal panning.
[Panning (Up/
Down)]
Corrects horizontal camera shake.
This is suitable for vertical panning.
[OFF] Turns the image stabilization function OFF.
To Next Page
Loading...
