6. Drive/Shutter/Image Stabilizer – Image Stabilizer
249
[Boost I.S. (Video)]
Increase the effectiveness of the image stabilizer during video recording.
This effect can help provide a stable composition when you want to
perform recording from a fixed perspective.
Settings: [ON]/[OFF]
•
When [Boost I.S. (Video)] is operating, [ ] is displayed on the recording screen.
• To change composition while recording, first set this to [OFF] before moving the
camera.
To set this to [OFF] during recording, use the Fn button. (Fn Buttons: 472)
• Longer focal lengths will result in weaker stabilization.
[Anamorphic (Video)]
You can switch to an image stabilizer that suits anamorphic recording.
Settings:
[]([2.0k])/[ ]([1.8k])/[ ]([1.5k])/[ ]([1.33k])/[ ]([1.30k])/
[OFF]
•
Make settings to suit the magnification of the anamorphic lens you are using.
• While [Anamorphic (Video)] is functioning, the set magnification appears on the
image stabilizer icons on the recording screen, as shown by [ ] and [ ].
• When [Boost I.S. (Video)] is set, [Boost I.S. (Video)] is prioritized.
• Image stabilizer functions on your lens may not work correctly. Turn off the image
stabilizer function on your lens if this is the case.
To Next Page
Loading...
Need help?
General
