13. Camera Customization – Fn Buttons
476
3
Find the function to register.
≥Rotate to select the sub tab where the function to register is
categorized (Setting Items ([Fn Button Set]/[Setting in REC
mode]): 478, Setting Items ([Fn Button Set]/[Setting in PLAY
mode]): 484) and then press or .
≥You can also select by pressing 2 to select the sub tab, pressing
34 or rotating , and then pressing 1.
≥Each press of [Q] switches between tabs [1] and [3].
4
Register the function.
≥Press 34 to select a function and then press or .
≥Selection is also possible by rotating or .
•
Select items with [N] by selecting the item again.
• Depending on the button, some functions cannot be registered.
To Next Page
Loading...
