14. Menu Guide – [Photo] Menu
533
• After selecting [Start], pressing the shutter button fully starts multiple exposure.
• Preview is displayed for each recording, and the following operations are
available:
– [Next] (You can also perform the same operation by pressing the shutter button
halfway.)
– [Retake]
– [Exit]: Records the picture, and finishes multiple exposure recording.
• To finish multiple exposure recording before starting the recording, press [Q] on
the recording screen.
• Recording information for the last-recorded image will be saved as recording
information for images recorded with multiple exposures.
• [Overlay] can be set only for RAW images recorded with the camera.
• When the following functions are being used, [Multiple Exposure] is not available:
– [Time Lapse Shot]
– [Stop Motion Animation]
– [Filter Settings]
– HDMI output
To Next Page
Loading...
