15. Wi-Fi/Bluetooth – Connecting to a Smartphone
621
Connecting to a Paired Smartphone
Connect paired smartphones using the following procedure.
1 Enable the Bluetooth function of the camera.
• [ ] [ ] [Bluetooth] [Bluetooth] [ON]
2 On the smartphone, start up “LUMIX Sync”.
• If a message is displayed indicating that the smartphone is searching for
cameras, close the message.
3 Select [ ].
4 Select [Bluetooth Setup].
5 Turn Bluetooth ON.
6 From [Camera registered] items, select the camera’s device name.
• Even if you set up pairing with more than one smartphone, you can only connect
to one smartphone at a time.
• When pairing takes some time, canceling the pairing settings on both the
smartphone and camera and re-establishing the connection may result in the
camera being detected correctly.
To Next Page
Loading...
Need help?
General
