11. Using the Wi-Fi/Bluetooth function
258
∫ Sending images in the camera to a web service with simple operations
1 Display an image.
2 Press 4.
(When group pictures are selected, press 3, and select
[Upload(Wi-Fi)] or [Upload All(Wi-Fi)].)
• The same operation can be performed by touching [ ].
(When group pictures are selected, select [Upload(Wi-Fi)]
or [Upload All(Wi-Fi)] after touch [ ], [ ], [ ], or
[ ], and then touch [ ].)
• If a screen is displayed asking you to select the connection method: (P264)
• If a screen is displayed asking yo to acquire a new login ID: (P260)
3 Select [Yes] on the confirmation screen.
4 Select a web service.
5 Check the send settings, and select [Set].
•Step 4, 5 are not necessary when you continue to send another image.
• To change the send setting, press [DISP.]. (P250)
• To terminate the connection, press [MENU/SET] or operate other controls to exit the
playback screen. You can also terminate the connection by pressing [Wi-Fi]. (P229)
To change the settings for sending images or web service
Terminate the Wi-Fi connection, and follow step 1 and onwards again.
• You can also change the send settings by pressing [Wi-Fi] while using a Wi-Fi connection.
(P229)
• When there are no available connections to wireless access points in History:
Select the connection method and connect the camera to a wireless access point. (P264)
• When you are not registered to the “LUMIX CLUB”:
Acquire a login ID and set a password. (P260)
• When group pictures are displayed continuously, all pictures in the group will be sent. When
group pictures are displayed one by one, the currently displayed picture will be sent.
SUB
MENU
To Next Page
Loading...
Need help?
General
