299
13. Others
• Is the camera connected to the TV correctly? (P272)
> Set the input selector of the TV to HDMI.
• Is the [VIERA Link] on this unit set to [ON]? (P206)
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
• Set to [PC(Storage)] in [USB Mode]. (P205, 277)
• Turn this unit off and on.
• Check if your PC is compatible with SDXC memory cards.
• A message prompting to format the card may be displayed when connecting, but do not format.
• If the [Access] displayed on the monitor does not disappear, disconnect the USB connection
cable after turning this unit off.
• Pictures cannot be printed using a printer that does not support PictBridge.
• Set to [PictBridge(PTP)] in [USB Mode]. (P205, 280)
• Release any trimming or edgeless printing settings on printer before printing.
• The aspect ratio of pictures is different from that of paper used for printing.
> If printing in shop, check if 16:9 sizes can be printed.
TV, PC and printer
No image on the TV. The TV screen is blurred or not coloured.
VIERA Link does not work.
Cannot communicate with the PC.
The card is not recognised by the PC.
(SDXC memory card is used.)
The picture cannot be printed when the camera is connected to a printer.
The ends of the pictures are cut at printing.
To Next Page
Loading...
Need help?
General
