Chapter 5 Operations — Memory Viewer function
104 - ENGLISH
f The playback order follows the display order set in the [MEMORY VIEWER] menu → [SORT] (x page 68).
Also in the cases where still image and movie les both exist in the same folder, they are played back according to the [SORT] setting.
f The operation guide on the lower part of the playback screen can be hidden by setting the [MEMORY VIEWER] menu → [GUIDE]
(x page 69) to [OFF].
f When images cannot be played, an error message is displayed.
f When switching the input to [MEMOERY VIEWER] while [AUTOPLAY] is set to [ON], automatic playback starts.
Playing back movies
This section describes the procedure using an operation example on the Memory Viewer screen in thumbnail
view.
Playback on the Memory Viewer screen in list view can be performed with the same procedure except for the le
selection.
Example of display during fast-forward playback (x10 speed)
Status display
Time bar
Operation guide
When automatic playback is enabled
This section describes the operations when the [MEMORY VIEWER] menu → [AUTOPLAY] (x page 68) is set
to [ON].
In this case, all movie les in the same folder are played back automatically.
1) Press asqw to select a file to be projected first from the thumbnails, and press the <ENTER>
button.
f Playback starts in the full-screen display.
f Pressing the <ENTER> button during playback pauses playback. Pressing it again resumes playback from
the position where the playback has been stopped.
f After playback ends, playback of the next le starts.
f Pressing w during playback performs fast-forward playback. Every press of w increases the speed. (3
levels)
f Pressing q during playback performs rewind playback. Every press of q increases the speed. (3 levels)
f Pressing a plays back the le being played back from the beginning. (cue)
f Pressing w during pause skips the le being played back and starts playback of the next le.
f Pressing q during pause returns playback to the previous le and starts playback.
2) Press the <RETURN> button.
f Automatic playback ends and the Memory Viewer screen (thumbnail view) returns.
When automatic playback is disabled
This section describes the operations when the [MEMORY VIEWER] menu → [AUTOPLAY] (x page 68) is set
to [OFF].
In this case, les to be projected are selected and played back one by one.
1) Press asqw to select a file from the thumbnails, and press the <ENTER> button.
f Playback starts in the full-screen display.
f Pressing the <ENTER> button during playback pauses playback. Pressing it again resumes playback from
the position where the playback has been stopped.