Panasonic PT-JX200GWU

Chapter 4 Settings — [NETWORK] menu
88 - ENGLISH
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
Disables password entry.
[ON]
Enables password entry.
Note
f When you connect a device to the projector using “Wireless Manager ME6.3”, setting [PASSWORD] to [ON] to require password entry is
recommended.
f When you use functions of “Multi Monitoring & Control Software” for simultaneous image distribution or deleting distributed images, images
cannot be distributed to the projector on which [PASSWORD] is set to [ON]. To use those image distribution functions, set it to [OFF].
Performing [PASSWORD CHANGE]
Set or change the password to connect to the projector.
1) Press as to select [Panasonic APPLICATION].
2) Press the <ENTER> button.
f The [Panasonic APPLICATION] screen is displayed.
3) Press as to select [PASSWORD CHANGE].
4) Press the <ENTER> button.
f The [PASSWORD CHANGE] screen is displayed.
5) Press asqw to select characters, and press the <ENTER> button to enter.
6) Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Note
f Up to eight characters can be set for a password.
f A password is not set in factory default settings. Since connection without password entry is available even when [PASSWORD] is set to
[ON], be sure to set a password in [PASSWORD CHANGE] if you set [PASSWORD] to [ON].
f Change the password periodically and make it hard to guess.
[NETWORK STATUS]
Display the status of the projector network.
1) Press as to select [NETWORK STATUS].
2) Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
3) Press qw to switch the pages.
f The page will change each time you press the button.
[PROJECTOR NAME]
Displays the projector name set on the projector.
The projector name can be changed to a desired name. (x page 82)
[NETWORK ID]
Displays the network ID (xed) given to the projector.
[WIRED LAN]
Displays the network information of the wired LAN set on the projector.
[DHCP]
Displays the status of use of DHCP server.
[IP ADDRESS]
Displays the IP address.
[SUBNET MASK]
Displays the subnet mask.
[DEFAULT GATEWAY]
Displays the default gateway.
[DNS1]
Displays the address of the primary DNS server.
[DNS2]
Displays the address of the secondary DNS server.
[MAC ADDRESS]
Displays the MAC address of wired LAN.