Chapter 3 Basic Operations — Operating with the remote control
ENGLISH - 55
Operating with the remote control
Switch on/off spotlight display
Enable/disable the setting items in [PATTERN] menu.
button
1) Press the <LIGHTING> button.
f The spotlight based on the items set for the user ([USER1] - [USER5]) selected in the [PATTERN]
individual adjustment screen is displayed.
2) Press the <LIGHTING> button again.
f The spotlight and the frame gradation disappear and the projection returns to the input image.
Note
f When you press the <LIGHTING> button, the setting of the user ([USER1] - [USER5]) in the [PATTERN] detailed setting screen is displayed.
Refer to “[LIGHTING] menu” (x page 66) for details about the pattern setting.
f If the spotlight and the frame gradation are set to [OFF] in the [PATTERN] detailed setting screen, the spotlight and the frame gradation
cannot be displayed when you press the <LIGHTING> button.
Adjusting the volume
The audio output volume can be adjusted.
button
1) Press the <VOL+> or <VOL
-
> button.
<VOL+>
Increases the volume.
<VOL
-
>
Decreases the volume.
To Next Page
Loading...
