Chapter 4 Settings — [SETUP] menu
ENGLISH - 71
1) Press as to select [SHIFT].
2) Press the <ENTER> button.
f The [SHIFT] screen is displayed.
3) Press asqw to adjust the position.
Orientation Operation Adjustment
Vertical (up and down)
adjustment
Press the a button.
The image moves up.
Press the s button.
The image moves down.
Horizontal (right and left)
adjustment
Press the w button.
The image moves right.
Press the q button.
The image moves left.
Note
f After setting [PROJECTION METHOD] and [VERTICAL FLIP], make adjustment in the [SHIFT] screen to move the projected image up,
down, left, or right to get a proper view of text on the projected image.
f The movable range of [SHIFT] may be restricted depending on the settings of [KEYSTONE] and [ASPECT]. To reset the vertical or
horizontal setting values to "0", press the <DEFAULT> button on the remote control.
f The movable range of [KEYSTONE] may be restricted depending on the settings of [SHIFT]. It is recommended to adjust [KEYSTONE] or
[ASPECT] before adjusting [SHIFT].
[ASPECT]
Switch the aspect ratio of the image.
1) Press as to select [ASPECT].
2) Press qw or the <ENTER> button.
f The [ASPECT] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
Displays images without changing the aspect ratio of the input signals.
[FULL]
Displays images in the entire screen range. When the aspect ratio of the input signal differs from that
of the screen range, the images are displayed with the input signal converted to the aspect ratio of
the screen.
Note
f If an aspect ratio which is different from the aspect ratio for the input signals is selected, the images will appear differently from the originals.
Be careful of this when selecting the aspect ratio.
f If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for public presentation, note that
adjusting the aspect ratio or using the zoom function to change the screen images may be an infringement of the rights of the original
copyright owner for that program under copyright protection laws. Be aware when you use the aspect ratio adjustment function of the
projector.
f [FULL] may not be allowed to select for some signals.
f The setting of [ASPECT] is not reected in internal test patterns (x page 98).
To Next Page
Loading...
