Chapter 4 Settings — [SETUP] menu
ENGLISH - 81
4) Press as to select an item to initialize.
[ALL USER DATA]
Returns all setting items including [SIGNAGE], [NETWORK], and [E-mail set up] to the factory default
settings.
The projector enters the standby mode to reect the setting values.
[NETWORK/E-MAIL]
Returns [SIGNAGE], [NETWORK], and [E-mail set up] to the factory default settings.
5) Press the <ENTER> button.
6) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
f [PROGRESS] is displayed while initialization is being performed.
Note
f After [ALL USER DATA] of [INITIALIZE] is executed, rst reconnect the power of the track system, and then turn on the projector.
[SERVICE PASSWORD]
This function is used by a service person.
To Next Page
Loading...
